Engineered System

Container Valve

Installed in the gas cylinder is used to control
the release of agent. Build up the container
valve extinguishing kit together with cylinders
started by Solenoid Actuator, Manual Actuator
or Pneumatic Actuator.
Order online

Container valve has long service life, low leakage rate, can automatically reset after use, re-filling agent needn’t change any accessories (such as burst disc, etc.). The pressure gauge port of the container valve are available with connection thread of M10X1 or NPT1/8.

Technical Specification:

Type	33 mm 25 bar	33 mm 42 bar	49 mm 25 bar	49 mm 42 bar
Body Material	Brass	Brass	Brass	Brass
Nominal Working Pressure	25 bar @21°C	42 bar @21°C	25 bar @21°C	42 bar @21°C
Safety Relief pressure (Burst Disc Rating)	60±6 bar	100±10 bar	60±6 bar	100±10 bar
Work Temperature	-20 °C ~60 °C	-20 °C ~60 °C	-20 °C ~60 °C	-20 °C ~60 °C
Inlet	2.5"-12UN	2.5"-12UN	3”-12UN	3”-12UN
Outlet	1.875"-12UN	1.875"-12UN	2.5"-12UN	2.5"-12UN
Actuator Port	M42X1.5	M42X1.5	M42X1.5	M42X1.5
Pilot Pipe Connection	G1/8	G1/8	G1/8	G1/8
Pressure Gauge Port	M10X1/NPT1/8	M10X1/NPT1/8	M10X1/NPT1/8	M10X1/NPT1/8